Thermostatic valves and lockshields, sets
The sets are an elegant solution for e. g. design radiators. A sublime effect will always be achieved with the Design-Edition „white“ or „chrome“ edition. Together with the thermostatic head DX the result will be such an attractive finish where everything fits together.
with thermostatic valve body, radiator lockshield and thermostatic head DX.
There are sets in 4 different versions in each case in white RAL 9016 (valve bodies powder-coated) or chrome plated available:
– Double angle, connection right
– Double angle, connection left
The body, which is made of brass, is designed for connection to a threaded pipe, or in conjunction with compression fittings, for connection to copper or precision steel pipes.
Permitted operating temperature TB 120°C. Permitted operating pressure PB 10 bar.
Thermostatic valve body
with integrated stepless precision presetting and white protection cap.
The flow of the presetting can be easily and precisely set with a key. The selected value can be read on the front of the thermostatic insert. With the key, only a specialist can create or change the setting. The stainless spindle is equipped with a double O-ring sealing. The outer O-ring is replaceable under pressure. The complete thermostatic insert can be replaced with the fitting tool without draining off the system.
for shutting off, draining off and filling.
Can be shut-off with a hexagonal key SW 5.
A drain-off and filling device for 1/2“ hose connection is available A drain-off and filling device for 1/2“ hose connection is available as accessorie.
Thermostatic head DX
Liquid-filled thermostat. High pressure power, lowest hysteresis, optimal closing time. Stable control behavior even in the case of small calculated p-band variation (<1K). Meet all requirements of the German EnEV and DIN V 4701-10. Setting range 6 °C to 28 °C. Valve stroke limiter. Setting numbers 1 to 5. Frost protection 6 °C. Max. sensor temperature 50 °C. Hysteresis 0.4 K. Water temperature influence 0.7 K. Differential pressure influence 0.3 K. Closing time 24 min.
The products, texts, photographs, graphics and diagrams in this document may be subject to alteration by IMI Hydronic Engineering without prior notice or reasons being given. For the most up to date information about our products and specifications, please visit www.imi-hydronic.com.