Double connection fitting with drain-off facility for radiators with integrated valves
The Vekolux double connection fitting is designed for installation onto radiators with integrated valves with an Rp1/2 female thread and a G3/4 male thread connection. The self-sealing connection makes the fitting easy to install on the radiator. Models in angle and straight forms, each designed for single and two-pipe systems, mean that the connection fitting can be used in a number of different ways.
HEIMEIER Vekolux double connection fitting for shutting off and draining off.
Spindle for the parallel shut-off of supply and return pipes in one operation. Operated with a HEIMEIER universal key.
Drain-off valve integrated into the spindle.
Single and two-pipe models in angle and straight form with R1/2 connection and G3/4.
Center distance of the connections is 50 mm (1,97 inch). Tolerance compensation ±1.0 mm (0,0394 inch) by special union nuts and a flexible flat sealing system for tension-free installation.
EPDM O-ring sealing on the spindle and cones. Body made of corrosion-resistant gunmetal, nickel-plated, with special geometry for the reduction of return heating of radiators in single pipe heating systems.
Pipe connector G3/4, with compression fittings for plastic, copper, precision steel, or multi-layer pipes.
For HEIMEIER valves, use only the HEIMEIER compression fittings which have been designed and labelled for that particular application (e. g. ID no. 15 THE).
Excellent connection design due to a stylishly shaped cover.
Permitted operating temperature TB 120°C (248°F), with cover TB 90°C (194°F).
Permitted operating pressure PB 10 bar.
The products, texts, photographs, graphics and diagrams in this document may be subject to alteration by TA Hydronics without prior notice or reasons being given. For the most up to date information about our products and specifications, please visit www.tahydronics.com.