Radiator lockshield with consistent presetting and drain-off facility
The Regulux is used in warm water pump heating systems and air conditioning systems. It makes possible the individual shut-off, drain-off and filling of e. g. of radiators in order to carry out painting or maintenance work, without having to shut down other radiators. The presetting cone which is integrated into the shut-off cone makes a hydraulic balance possible through presetting.
Radiator lockshield for shutting off, presetting, draining off and filling.
Separate presetting cone for consistent presetting, adjustable with a screw driver.
Can be shut off with a hexagonal key SW 5, so that the preset value is not changed when opening or closing.
Versions with female thread DN 10 to DN 20, with male thread G 3/4 / DN 15 and Viega press connection with SC-Contur 15 mm / DN 15 in angle and straight form.
Length according to DIN 3842.
A drain-off and filling device for 1/2" hose connection is available on request.
Body made of corrosion-resistant gunmetal. With the model with a female thread, it is possible to make a connection to a threaded pipe. With the model with compression fittings, a connection can be made to a copper, precision steel or multi-layer pipe. With the model with a male thread, it is also possible to make a connection to a plastic pipe using compression fittings.
Versions with Viega press connection (15 mm) with SC-Contur are suitable for copper, Viega Sanpress stainless steel and Prestabo steel pipes.
For Regulux, use only the appropriate compression fittings with the IMI HEIMEIER label (label e. g. 15 THE).
Permitted operating temperature TB 120°C (248°F), with press connection TB 110°C (230°F).
Permitted operating pressure 10 bar.
The products, texts, photographs, graphics and diagrams in this document may be subject to alteration by IMI Hydronic Engineering without prior notice or reasons being given. For the most up to date information about our products and specifications, please visit www.imi-hydronic.com.