Thermostatic valve body without presetting
The thermostatic valve bodies with particularly low resistance are used e. g. in two-pipe low temperature heating systems with a small temperature spread and conventional single pipe heating systems.
Heating and cooling systems.
Max. working temperature: 120°C, with protection cap or actuator 100°C.
Min. working temperature: -10°C.
Valve body: corrosion resistant Gunmetal
O-rings: EPDM rubber
Valve disc: EPDM rubber
Return spring: Stainless steel
Valve insert: Brass
The complete thermostatic insert can be replaced using the fitting tool without draining the system (DN 10, DN 15).
Spindle: Niro-steel spindle with double O-ring sealing. The outer O-ring can be replaced under pressure.
Valve body and fittings are nickel-plated.
THE, country code, flow direction arrow, DN and KEYMARK-Designation.
Blue protection cap. Blue stuffing box (DN 10, DN 15).
KEYMARK-certified thermostatic heads and thermostatic valve bodies see also technical leaflet "Thermostatic Heads".
The female-threaded version is designed for connection to threaded pipe, or in conjunction with compression fittings, to copper precision steel or multi-layer pipe (only DN 15). The male-threaded version , in conjunction with the appropriate compression fittings, permits connection to plastic pipe.
Connection to thermostatic head and actuator:
IMI Heimeier M30x1.5
The products, texts, photographs, graphics and diagrams in this document may be subject to alteration by IMI Hydronic Engineering without prior notice or reasons being given. For the most up to date information about our products and specifications, please visit www.imi-hydronic.com.