Control valves with electric actuators
Suitable in building applications for heating and cooling systems. Available in dimensions up to DN 150, pressure class PN 6 and PN 16 with flanges.
Heating and cooling systems
CV206/216 GG: 2-way control valve
CV306/316 GG: 3-way mixing or on/off valve
CV206/216 GG: Equal percentage.
CV306/316 GG: A–AB equal percentage. B–AB linear.
CV206/306 GG: DN 15-100
CV216/316 GG: DN 15-150
CV206/306 GG: PN 6
CV216/316 GG: PN 16
Max. working temperature: 150°C (The valves should be mounted in horizontal position at temperatures above 130°C)
Min. working temperature: 0°C (Suitable for water with antifreeze compounds down to -10°C)
(For lower and higher temperatures (up to 200°C) and working pressures PN 25-40 please contact IMI Hydronic Engineering.)
Body: Cast iron EN-JL1040
Plug: Brass CW614N (DN 125-150 Cr-Ni steel)
Stem: CrMO-steel 1.4122
Stem sealing: EPDM O-rings
PN, DN and flow direction arrow.
(in case of CV306/316 GG names of ports also - A, B, AB)
Flanges according to EN 1092-2 type 21
Face to face:
According to EN 558-1 basic series 1
EN 1349, seat-leakage VI G 1 (tight sealing)
Max. lift of the control valve:
DN 15-50: 14 mm
DN 65: 20 mm
DN 65-100: 30 mm
DN 125-150: 50 mm
DN 15: 50:1
DN 20-150: 100:1
MC55, MC65, MC100, MC160, MC161, MC250, MC400, MC500, MC1000, MC100FSE or MC100FSR.
The products, texts, photographs, graphics and diagrams in this document may be subject to alteration by IMI Hydronic Engineering without prior notice or reasons being given. For the most up to date information about our products and specifications, please visit www.imi-hydronic.com.