Control shut-off buttery valves
Control and shut-off buttery valves for open and closed circuits with electric quater-turn actuator for HVAC systems, sanitary and industrial plants.
Chilled-, hot- and industrial water, low pressure steam, water with antifreeze and anticorrosive compounds (approx. 50%): glycol, glycerine, ethyl alcohol, propylene dichloride alcohol, mono ethyl alcohol, ethyl, methyl alcohol, antidichloride fluor methane® N+L.
DR16 EVSA: Shut-off
DR16 EVSR: Control
DN 50-125: PN 6 - PN 16 (PN 6 please state when ordering)
DN 150-200: PN 10-16
DN 250-350: PN 10
Max. working temperature: 110°C
Min. working temperature: -10°C
For lower and higher temperatures please contact IMI Hydronic Engineering.
Body: Spherioidal graphite EN-JS1030
Seat ring: EPDM
Flap: CrNi-steel 1.4581
Shaft: CrNi-steel 1.4021
Shaft sealing: EPDM
DN and PN.
Optionally from both side.
Flangeless wafer type PN 6-16.
Face to face:
According to EN 558-1 basic series 20.
EN 1349 – seat-leakage VI G1 (tight sealing).
- Technical silicon free version.
- Special varnish, max. 80°C
The products, texts, photographs, graphics and diagrams in this document may be subject to alteration by IMI Hydronic Engineering without prior notice or reasons being given. For the most up to date information about our products and specifications, please visit www.imi-hydronic.com.