For all thermostatic heads and actuators
The thermostatic valve bodies with the Heimeier M 30 x 1.5 connection are made of corrosion-resistant gunmetal and are equipped with reliable and proven double O-ring seals. Presetting, Standard, low resistance or reversed flow direction versions are available as angle model, straight model, double angle model, axial model or as 3-way valves.
Standard
Technical description
The Standard HEIMEIER thermostatic valve bodies with black protection caps can be used with all HEIMEIER thermostatic heads and actuators.
The stainless spindle is equipped with a double O-ring sealing. The outer O-ring is replaceable under pressure. With the HEIMEIER fitting tool, the complete thermostatic insert can be replaced with DN 10 to DN 20 without the need to drain off the system.
The body, which is made of corrosionresistant gunmetal with a female thread, is designed for connection to a threaded pipe, or in conjunction with compression fittings, for connection to copper, precision steel or multi-layer pipes (only DN 15).
The model with a male thread, in conjunction with the appropriate compression fittings, makes it possible to connect a plastic pipe. Versions with Viega press connection (15 mm) with SC-Contur are suitable for copper, Viega Sanpress stainless steel and Prestabo steel pipes.
For the HEIMEIER valve bodies, use only the accompanying, labelled HEIMEIER compression fitting (label e. g. 15 THE).
The DN 10 / DN 15 models with boss marking can be converted to presetting or finest presetting.
The DN 10 / DN 15 thermostatic valve bodies in angle and straight form with a female thread and press connection can be fitted with covers from the DESIGNLINE range (not for valve bodies with reduced length), see accessories.
Permitted operating temperature TB 120°C (248°F), with cover, TB 90°C (194°F), with press connection TB 110°C (230°F). Permitted operating pressure PB 10 bar, low pressure steam 110°C (230°F) / 0.5 bar.
V-exakt
Technical description
The HEIMEIER V-exakt thermostatic valve bodies with integrated precision presetting and white protection cap can be used with all HEIMEIER thermostatic heads and actuators.
The flow ranges of the presetting can be easily and precisely set with a key. The selected value can be read on the front of the thermostatic insert. With the key, only a specialist can create or change the setting. It is impossible for a nonspecialist to tamper with the settings without a tool.
The stainless spindle is equipped with a double O-ring sealing. The outer O-ring is replaceable under pressure.
The complete thermostatic insert can be replaced with the HEIMEIER fitting tool without draining off the system.
The body, which is made of corrosionresistant gunmetal with a female thread, is designed for connection to a threaded pipe, or in conjunction with compression fittings, for connection to copper, precision steel or multi-layer pipes (only DN 15). The model with a male thread, in conjunction with the appropriate compression fittings, makes it possible to connect a plastic pipe. Versions with Viega press connection (15 mm) with SC-Contur are suitable for copper, Viega Sanpress stainless steel and Prestabo steel pipes.
For HEIMEIER valve bodies, use only the accompanying, labelled HEIMEIER compression fitting (label e. g. 15 THE).
The DN 10 / DN 15 thermostatic valve bodies in angle and straight form with a female thread and press connection can be fitted with covers from the DESIGN-LINE range (not for valve bodies with reduced length) – see accessories.
Permitted operating temperature TB 120°C (248°F), with cover, TB 90°C (194°F), with press connection TB 110 °C (230°F). Permitted operating pressure PB 10 bar.
F-exakt
Technical description
The HEIMEIER F-exakt thermostatic valve bodies with integrated finest presetting and red protection cap can be used with all HEIMEIER thermostatic heads and actuators.
The flow ranges of the presetting can be set easily and precisely using a key. The selected value can be read on the front of the thermostatic insert. With the key, only a specialist can create or change the setting. It is not possible for an unqualified person to tamper with the settings without a tool.
The stainless spindle is equipped with a double O-ring sealing. The outer O-ring is replaceable under pressure.
The complete thermostatic insert can be replaced with the HEIMEIER fitting tool without draining off the system.
The body, which is made of corrosionresistant gunmetal with a female thread, is designed for connection to a threaded pipe, or in conjunction with compression fittings for connection to copper, precision steel or multi-layer pipes (only DN 15).
For HEIMEIER single-pipe valve bodies, use only the accompanying, labelled HEIMEIER compression fitting (label e. g. 15 THE).
The thermostatic valve bodies in angle and straight form can be fitted with covers from the DESIGN-LINE range – see accessories.
Permitted operating temperature TB 120°C (248°F), with cover, TB 90°C (194°F). Permitted operating pressure PB 10 bar.
Valves with particularly low resistance
Technical description
HEIMEIER thermostatic valve bodies with particularly low resistance (gravity) and blue protection cap can be used with all HEIMEIER thermostatic heads and actuators.
The stainless spindle is equipped with a double O-ring sealing. The outer O-ring is replaceable under pressure. With the HEIMEIER fitting tool, the complete thermostatic insert can be replaced with DN 10 to DN 15 without the need to drain off the system.
The body, which is made of corrosionresistant gunmetal with a female thread, is designed for connection to a threaded pipe, or in conjunction with compression fittings, for connection to copper, precision steel or multi-layer pipes (only DN 15).
The model with a male thread, along with the compression fittings, makes it possible to also connect plasticpipes.
For HEIMEIER valve bodies, use only the accompanying, labelled HEIMEIER compression fitting (label e. g. 15 THE).
The thermostatic valve bodies DN 10 / DN 15 in angle and straight form with female thread can be fitted with covers from the DESIGN-LINE range – see accessories.
Permitted operating temperature TB 120°C (248°F), with cover, TB 90°C (194°F). Permitted operating pressure PB 10 bar, low pressure steam 110°C (230°F) / 0.5 bar.
DN 25/DN 32 black protection cap.
Valves for reversed flow direction
Technical description
The HEIMEIER thermostatic valve bodies for reversed flow direction with black protection cap can be used with all HEIMEIER thermostatic heads and actuators.
The stainless spindle is equipped with a double O-ring sealing.
The outer O-ring is replaceable under pressure. The complete thermostatic insert can be replaced with the HEIMEIER fitting tool without draining off the system.
The body, which is made of corrosionresistant gunmetal with a female thread, is designed for connection to a threaded pipe, or in conjunction with compression fittings, for connection to copper or precision steel pipes.
For HEIMEIER valve bodies, use only the accompanying, labelled HEIMEIER compression fitting (label e. g. 15 THE).
Permitted operating temperature TB 120°C (248°F). Permitted operating pressure PB 10 bar, low pressure steam 110°C (230°F) / 0.5 bar.
Three-way valve bodies with automatic bypass control
Technical description
The HEIMEIER thermostatic three-way valve bodies with automatic bypass control and black protection cap can be used with all HEIMEIER thermostatic heads and actuators.
The bypass can be connected with the corresponding bypass T-piece on the radiator return.
Models for the connection on the radiator, left or right.
The stainless spindle is equipped with a double O-ring sealing. The outer O-ring is replaceable under pressure.
The body of the valve body, which is made of nickel-plated gunmetal, or the bypass T-piece, which is made of nickelplated brass, is designed for connection to the threaded pipe or when used with compression fittings, for connection to copper, precision steel or multi-layerpipes.
For HEIMEIER valve bodies, use only the accompanying, labelled HEIMEIER compression fitting (label e. g. 15 THE).
Bypass connection with:
Ø 15 compression fitting,
DN 15 (1/2”) threaded nipple or
Ø 15 soldered nipple.
Permitted operating temperature TB 120°C (248°F). Permitted Operating pressure PB 10 bar.