Differential pressure controller
STAP is a high-performing differential pressure controller that keeps the differential pressure over the load constant. This delivers accurate and stable modulating control, ensures less risk of noise from control valves, and results in easy balancing and commissioning. STAP’s unrivalled accuracy and compact size make it particularly suitable for use on the secondary side of heating and cooling systems.
Heating (not steam) and cooling systems.
Differential pressure control
Max. differential pressure (ΔpV):
250 kPa (84 ft H2O/37 PSI)
DN 15-25: 10*-60 kPa (3.34-20.1 ft H2O/1.45-8.70 PSI)
DN 32-50: 20*-80 kPa (6.69-26.8 ft H2O/2.90-11.6 PSI)
*) Delivery setting
Max. working temperature: 120°C
Min. working temperature: -20°C
Valve body: AMETAL®
O-rings: EDPM rubber
Membrane: HNBR rubber
Spring: Stainless steel
AMETAL® is the dezincification resistant alloy of IMI Hydronic Engineering.
Body: TA, PN 16/150, DN, inch size and flow direction arrow.
Bonnet: STAP, ΔpL range in Ft H2O and PSI.
The products, texts, photographs, graphics and diagrams in this document may be subject to alteration by IMI Hydronic Engineering without prior notice or reasons being given. For the most up to date information about our products and specifications, please visit www.imi-hydronic.com.