Thermal actuator for heating, ventilation, and air conditioning systems
The EMOtec thermal actuator with position indicator (NC) can be installed in temperature and/or timerelated 2-point control systems.
The EMOtec thermal actuator is a twopoint actuator for connection to a temperature controller with two-point output, e.g. HEIMEIER room Thermostat P or Radiocontrol F-System for floor heating.
The actuator NC is equipped with a position indicator on the top (valve closed / valve open).
Models with 230 V (with built-in overvoltage protection 2.5 kV) and 24 V operating voltages, each NC or NO.
EMOtec has an electrically heated expansion system which is secured against overtravel.
The positioning force within the close range is adapted to thermostatic valve bodies with soft valve discs.
It is maintenance free and functions without noise.
Depending on the model, in a currentless status, EMOtec holds the valve closed (NC model) or open (NO model).
The body is designed in a white RAL 9016, heat-resistant, shock-proof plastic.
The EMOtec is designed to be installed on all HEIMEIER thermostatic valve bodies and three-way valves. Adapters enable the mounting of thermostatic valve bodies of other manufacturers, see accessories.
Its compactness also makes it especially suited to install in manifold cabinets.
The products, texts, photographs, graphics and diagrams in this document may be subject to alteration by TA Hydronics without prior notice or reasons being given. For the most up to date information about our products and specifications, please visit www.tahydronics.com.