Regulator for innfelt montering til gulvvarmeanlegg
Multibox K, RTL og K-RTL
Teknisk beskrivelse
HEIMEIER Multibox for innfelt montering med ramme, dekkplate og fester til regulering av temperaturen i ett rom med gulvvarme uten sekundærpumpe.
Leveres i følgende utførelser:
Multibox K
med termostatventil for regulering av romtemperaturen i ett rom med f.eks. gulvvarme.
Multibox RTL
for maksbegrensning av returtemperaturen i rom med gulvvarme i et kombinert gulvvarme og radiatorsystem.
Multibox K-RTL
for temperaturregulering av rom med gulvvarme, hvor man ønsker å regulere på to parametere. Både på lufttemperatur og returbegrensing.
Alle utførelser leveres med deksel og temperaturomstiller i enten hvit RAL 9016 eller forkrommet.
Innbyggingsdybde for innfelt boks er 60 mm.
Fleksibel innbygging takket være variabel avstand mellom innfelt boks og deksel med inntil 30 mm.
Dekselet kan utligne er skrå montering av den innfelte boksen med inntil 6° til hver side.
Termostathode K med væskefylt termostat. Høy stillkraft, liten hysterese, optimal lukketid. Stabil regulering også ved små variasjoner i reguleringsdifferansen (<1 K). Oppfyller EnEV eller DIN V 4701-10. Skala 1-5. Frostsikring.
Temperaturområde 6 °C til 28 °C.
Returtemperaturbegrenser (RTL) med ekspanderende, væskefylt termostat. Skala 1-5. Temperaturområde 10 °C til 50 °C.
Ventilhus av rødgods. Termostatoverdel med rustfri stålspindel og dobbelt O-ringstetning. Ytre O-ring kan byttes uten at anlegget tømmes.
Alle utførelser er utstyrt med en avluftings-/spyleventil.
Rørtilkobling RG 3/4 med konus som passer til klemringskoblinger for plast-, kobber-, presisjonsstål- og lamellert rør.
For HEIMEIER armaturer må det kun benyttes tilhørende klemringskoblinger merket HEIMEIER (f.eks. 15 THE).
Teknisk beskrivelse
HEIMEIER Multibox F flush box with frame including thermostatic head, cover plate and fixing bars for the individual room temperature control with thermostatic valve of, for instance, floor heating systems, without auxiliary power.
Through a capillary tube, the temperature sensor liquid of the thermostatic head acts on the bellows in the valve adaptor. There is therefore never any change in the appearance of the cover with thermostatic head – irrespective of the installation depth.
All models with cover and visible graduation cap in white RAL 9016.
The flush box has an overall depth of 60 mm.
Adjustable mounting thanks to variable spacing between flush box and cover of up to 30 mm. The cover can compensate for slanted mounting of the flush box up to 6° on each side.
Thermostatic head with liquid-filled thermostat. High actuating power, low level of hysterisis, optimum shutting time. Stable control properties even with small design control differences (<1 K). Meets EnEV and/or DIN V 4701-10. Cue number 1-5. Anti-freeze protection. Zero position (valve opens at approx. 0° C). Temperature range 6° C - 27° C.
Body made of gunmetal. Thermostatic insert with stainless steel spindle and double O-ring seal. Outer O-ring can be replaced without system draining.
Multibox F is provided with a venting valve.
Pipe-side G3/4 adaptor with cone – suitable for compression fittings for plastic, copper, precision steel and multi-layer pipe.
For HEIMEIER valves, only use the corresponding, designated HEIMEIER compression fittings (designation e.g. 15 THE).
Pipe guide channel for easy pipe/valve attachment, see Accessories.
Teknisk beskrivelse
HEIMEIER Multibox C/E and Multibox C/RTL flush box with frame, closed cover plate and fixing bars for controlling, for instance, floor heating systems.
Multibox C/E
for individual room temperature control of, for instance, floor heating systems with thermal or motor actuators and/or with remote dial thermostatic head F.
Multibox C/RTL
for maximum limitation of the return temperature with return temperature limiter of, for instance, combined floor/radiator heating systems.
All models with closed cover in white RAL 9016.
The flush box has an overall depth of 60 mm.
Adjustable mounting from variable spacing between flush box and cover of up to 30 mm.
The cover can compensate for slanted mounting of the flush box up to 6° on each side.
Return temperature limiter (RTL) with expanding substance-filled thermostat.
Cue number 1-5. Temperature range 10° C - 50° C.
Body made of gunmetal. Thermostatic inserts with stainless steel spindle and double O-ring seal. Outer O-ring can be replaced without system drainage.
All models are equipped with a venting/flushing valve.
Pipe-side G3/4 adaptor with cone suitable for compression fittings for plastic, copper, precision steel and multilayer pipe.
For HEIMEIER valves, only use the corresponding, designated HEIMEIER compression fittings (designation e.g. 15 THE).
Pipe guide channel for easy pipe/valve attachment, see Accessories.